SVT43 Change TYPE value
If you are experiencing issues with pump operation or button configuration, it may be
an indication that the TYPE value has been corrupted. Please follow the instructions
below to check this value is set correctly.
 |
1. Press the Settings icon |
 |
2. Use the down arrow to navigate to the bottom and select “ADV Enter advanced menu” |
 |
3. Enter Pin number ”14863” and then “Enter” |
 |
4. Use the down arrow to navigate to the bottom and select “FACT Factory options menu” |
 |
5. Enter Pin number ”74269” and then “Enter” |
 |
6. Select “TYPE Model type” in the menu |
 |
7.Using the “+” or “-” adjust the TYPE value to match your controller and then select “SAVE” Once saved then press the back arrow button |
 |
8. Use the down arrow to navigate to the bottom and select “BOOT Reboot controller” |
 |
9. The spa will then carry out a priming cycle and pumps should work as expected |
