With rising electricity prices, increasing renewable energy regulations and the wish to heat spas faster and at a greatly reduced cost, heat pumps for spa pools have never been more important. However heat pumps for spa pools that excel in cold climates have been unavailable until now. Our innovative Cold Climate Technology provides exceptional performance in cold climates allowing efficient operation in sub zero temperatures down
to -25ºC.

null

High COP in
Low Air Temps

Cold climate technology
maximises COP output in
low ambient temperatures.
Stunning COP of over 2.0
at -15’C ambient temp /
38’C water temp
null

Dual Electronic Expansion Valves

Dual Electronic Expansion
Valves (2xEEV) and custom
cold climate compressors
ensure optimal delivery of
refrigerant flow to maximise
COP in low air temps
null

Interfaced to Spa Control

Dedicated interface for
seamless connectivity to
SV Series spa control.
Finger-tip temperature and
heat pump control from
spa-side keypad
null

Massive Power Savings

Experience up to 75%
reduction in your heating
cost on every single power
bill. The more you use the
spa the more you save!

$0 Net Cost – Fast ROI

The power savings repay the investment
outlay resulting in a $0 net cost. ROI can
be as short as 1-2 years on a swim spa
and 2 – 3 years on a spa

Faster Heat Up Times

With large 13kW output, the cold climate
heat pump can heat your spa more than
twice as fast as standard electric heaters

Corrosion Resistant Cabinet

Custom blended plastic engineered for
increased UV & corrosion resistance and
to withstand extreme sub-zero temps

Simple Plug-n-play Installation

Plug-n-play direct cable connection to all
SV spa controls. No additional power
circuits required. Automatic detection
SNHP130CC_pic
SNHP120_back (1)-min
SNHP130CC_pic SNHP120_back (1)-min

All seasons operation

The SV Series Cold Climate heat pump has been specifically designed to operate in low and sub-zero temperatures,conditions in which heat pumps normally cannot operate under and would otherwise have to be turned off and ‘winterised’. Our sophisticated low ambient technology, cold climate compressors and automatic defrost protection allow operation throughout all seasons even in sub-zero temperatures down to -25’C. Automatic defrost control will be activated when necessary to maintain optimal heat pump performance.

Cold climate technology

Our innovative Cold Climate Technology provides exceptional performance in cold climates. Dual Electronic Expansion Valve (2 x EEV) technology coupled with specially engineered cold climate compressors control and adjust refrigerant flow to suit ambient temperature variations with pin-point accuracy. This results in up to 25% higher energy efficiency and maximised COP output in low ambient temperatures.

This technology enables us to outperform other heat pumps across all ambient temperature ranges and deliver a stunning COP value of over 2.0 at -15’C (5’F) ambient temp / 38’C (100’F) water temp.

Using technology so your spa costs you less to run

With heating your spa water accounting for around 85% of the total operating cost you want to ensure you have the
world’s most efficient heater installed on your spa. By using PowerSmart refrigeration technology our SV Series heat pumps can output more than five times more energy in heat compared to what they consume in electricity, ensuring your spa delivers the lowest possible daily operating cost

How does it work?

Our heat pumps use refrigeration technology to extract heat from the air (even when cold) and only consume a very small amount of energy to power a fan motor and compressor. When compared to gas or electric heaters our heat pumps use a tiny portion of energy to generate the same amount of heat output, using around 75% less energy than an electric spa heater & 55% less energy than natural gas.
SpaNet Heat Pumps vs Gas

Generate free energy

For every 1 kilowatt of electricity a standard electric heater consumes it only outputs 1 kilowatt of heat. In comparison for every 1 kilowatt of electricity the SV Series Cold Climate heat pumps consume they output up to 5.85 kilowatts of heat, thereby generating up to 4.85 kilowatts of heat for FREE! With our 13kW Cold Climate heat pumps using 2.25 kilowatts of input power they are generating up to 10.75 kilowatts for FREE!

The 13kW SV Series Cold Climate heat pump

Power saving offsets cost

When you have a SV heat pump you’re consuming less1 energy which means smaller energy bills and massive savings on electricity each and every month, saving your thousands for years to come. The money saved on electricity is so significant it will pay for your investment over a short period of time. This means the heat pump has a $0 net cost and is essentially FREE!

Why pay your energy supplier thousands of dollars each
year for no reason? Install a heat pump today and enjoy
these benefits

  • Reduce heating costs by up to 75% on every single power bill
  • Saves you approximately $1,000 p/yr* on heating an average 5-6 person spa pool (over electric element heating). Experience greater savings on larger spas
  • The monthly power savings repay the investment cost so the heat pump ends up costing you nothing and then you continue to save money, every month, for the life of the spa
  • If you don’t install a heat pump, not only will your increased electricity costs have paid back what a heat pump would have cost you, you will have also paid thousands more than needed to heat your spa
  • Why line your energy supplier’s pockets? Install a heat pump and save thousands off your energy bills every year for the life of the spa

* Saving is based on comparison between 5.5kW heat pump over a 3kW standard spa heater, using a 1500L or larger spa, operating for 365 days, set to 38’C at all
times, being used 2-3 times per week, hard cover in place when not in use, summer ambient of 20’C-28’C and winter ambient of 10’C-16’C.

Eco-friendly technology

Not only do our heat pumps deliver genuine power savings and financial reward to a spa owner, they are an eco-friendly appliance that provide a massive reduction in electricity consumption and significantly lower the carbon footprint of a spa. It’s comforting to know you can save money whilst caring about our world and the environment in which we live.

Reduced Carbon Emissions

SV heat pumps are a low carbon technology that use minimal electricity and utilise renewable heat from the environment to heat the spa water. This reduces your home’s greenhouse gas emissions and helps the environment.

Eco-Friendly Refrigerant

Utilising R410A refrigerant SV heat pumps are safe for the environment. Unlike other refrigerants, R410A does not cause ozone depletion and achieves higher performance with reduced power consumption.

SV Series Heat Pump Interface

SV Series PowerSmart Heat Pumps are the first heat pumps to offer true integration to a spa pool. There is no separate keypad on the heat pump for adjusting settings, rather they feature a dedicated interface for seamless integration to a SV Series spa control allowing all temperature settings and mode adjustments to be conveniently controlled via the spa side keypad. The heat pump and spa control have been designed to work in synergy. With solid state diagnostics and real time heat pump monitoring the SV series control system correctly looks after every need of the heat pump ensuring long term reliability whilst delivering absolute minimum operating costs.

Automatically heats or cools to
maintain your desired water
temperature (10ºC – 40ºC)

Plug-n-play direct cable
connection – No additional
power circuit required

Convenient heat pump and
temperature control via
spa side keypad

Rapid heat recovery mode:
Heat Pump + SV electric
element boost

Automatic heat pump
detection and disabling of
SV electric element

Correctly sequenced
start-up / shut-down of
heat pump components

Why you should only have an interfaced heat pump

Feature

SV Series Interfaced Heat Pump

Generic Non-Interfaced Heat Pump

Automatic heating
and cooling of spa
water

YES – water temperature will be
automatically maintained to your desired
temperature from 10ºC – 40ºC

NO – standard spa controllers only support
heating and have no ability to cool

Simple
temperature
adjustment and
heat pump control
from spa side
keypad

YES – the SV interface provides convenient
finger-tip control over temperature, heat
pump mode (heat only/cool only/automatic)
and diagnostic information all controlled via
the spa pool’s topside keypad

NO – there is no communication between
spa control and heat pump. Settings can
only be altered from a keypad on the heat
pump which is often installed in difficult to
access locations away from the spa

Rapid heat
recovery mode:
heat pump + SV
electric element
boost

YES – a user adjustable menu option to
activate the SV electric element to run in
conjunction with the heat pump to boost
heating and reduce heat recovery times.
Ideal for when spas are emptied / refilled
or when the water temperature needs to
be raised significantly in a short period

NO – the internal heaters of standard spa
controllers must be disconnected if a heat
pump is installed. The heat pumps are then
usually wired in a questionable
(unapproved/illegal) way to the spa
controllers heater connections

Simple plug-n-play
direct cable
connection to spa
control

YES – all SV spa controls feature dedicated
data and power sockets for instant
connection of a SV series heat pump. No
additional power circuits are required.
Automatic heat pump detection and
disabling of electric element

NO – standard spa controls have no
provision for a heat pump. A seperate
power supply is required, or the wiring of
the spa control must be modified voiding
product safety approvals. Electric element
wiring must be manually disconnected

Correctly
sequenced start-
up and shutdown
of heat pump
components

YES – the SV spa controller manages all
heat pump functions and components. Its
real time monitoring ensures the fan,
valves, defrost elements and compressor
are all switched on and off in the correction
sequence required for reliable heat pump
operation and long term life expectancy.
Low ambient temperatures and defrost
needs are taken into account and dealt
with appropriately

NO – the heat pump will be operating and
the standard spa controller will simply cut
power to it. The heat pump components
are not switched in the correct sequence,
degrading the components through
temperature and pressure spikes, leading
to shortened expected life. Defrost cycles
are cut short or missed completely and any
accumulated run data is lost when the
power is cut off unexpectedly

Integrated
PowerSmart
energy saving
features

YES – the integrated SV heat pumps
benefit from the powerful energy savings
features of the SV spa control such as
programmable off-peak heating / filtration,
dynamic thermal tuning, away and
weekend operating modes

NO – there is no communication or
programmable ability between the spa
control and the heat pump

Cool your spa in summer

Spa pools are designed to trap and retain heat and most spa controls can only heat the spa water. With no cooling ability, the higher ambient temperatures during warmer months often result in spas being too hot to use. However the SV heat pump interface revolutionises spa temperature control. SV heat pumps not only provide automatic heating of the spa water, but automatic cooling of the spa water as well. Simply set your desired water temperature (from 10ºC – 40ºC) and let the SV heat pump do the rest. Enjoy your spa year round – heat or cool depending on the season.

Why every spa should have a SV Series heat pump fitted

Reduced electricity bills

saving you thousands for
years to come

Affordable
year-round spa use

leave your spa hot 24/7

Faster heat up times

large heat output
reduces initial heat up
and recovery times

Spa stays
hot on cold nights

maintains temperature
when spa is in use

Dualcore heat and cool

heat or cool your spa
depending on season

$0 net cost

energy savings pay back
investment outlay

Reduced
carbon emissions

low carbon technology

Interfaced to spa control

fingertip control from
spa-side keypad

Plug-n-play install

no additional circuit,
direct cable connection
to SV spa control

SV Series Cold Climate Heat Pump Specifications

SN-HP-130CCP

  • POWER
  • Input Voltage
  • Hertz / Phase
  • Power Input
  • Current
  • HEATING OUTPUT
  • Heating Capcity - A24ºC / W27ºC
  • COP - A24ºC / W27ºC
  • Cooling Capcity - A32ºC / W27ºC
  • EER - A32ºC / W27ºC
  • COMPONENTS
  • Compressor style
  • Compressor Brand
  • Heat Exchanger
  • Deforest Element
  • Refrigertant
  • MECHANICAL
  • Water Connection
  • Operating Temperature Range
  • Fan Drection
  • Fan Rotate Speed - RPM
  • Noise - dB(A)
  • Water Flow Volume - m/3hr
  • Net Unit Size - L/W/H (mm)
  • Carton Size - L/W/H (mm)
  • Net / Gross Weight - (kg)

  • SN-HP-130CCP
  • 220-240V AC
  • 50Hz/ 1
  • 2.5kW
  • 11.8A
  • 13.0kW
  • 5.85
  • 9.2kW
  • 3.5
  • Rotary
  • Hitachi
  • Titanium/PVC
  • Electric
  • R410A
  • 40mm PVC
  • -30ºC to 40ºC
  • Horizontal
  • 800
  • 55
  • 8
  • 1040x350x730
  • 1080x440x770
  • 82 / 90