Setting Jet Pump Time Out Period – T.OUT By default, the time out period for your jet pump or blower is 30 mins. This can be adjusted in the Setup menu. The range of time that can be set is between 10 to 60 mins. Note: The time out period can’t be adjusted on SV…
Heating Modes Explained The SV controllers feature 3 different operating modes that effect demand heating and filtration behaviour (refer table below). These can be adjusted via the setup menu. Display Mode Description NORM Normal Normal operation for demand heating and filtration AWAY Away Demand heating is DISABLED. Filtration is fixed at 1 hour per day…
Setting filtration run time FILT – Total Filtration run time (hours per day) Total filtration run time per day can be set via the Setup menu. Simply hold down both the UP & DOWN arrow buttons at the same time. Then toggle through the menu options with either arrow button until the screen displays FILT.…
Setting power save timers – P.SAV Accessed via the Setup menu Power Save (P.SAV) timers can be set during hours of peak power tariffs to ensure no unnecessary heating or filtration will take place during that time. The power save setting consists of a choice of; mode, peak power period start time and peak power…
Setting Sleep timers Sleep timers very handy feature that enables the user to stop all spa activity during certain times of day or night. While the controller is sleeping NO automatic heating or filtration maintenance will occur, however the spa can still be operated by manual use. There are two individual sleep timers that can…
Setting your daily Water clean Cycle – W.CLN SV & SV Mini controllers are automatically programmed to activate a 10-minute daily sanitisation cycle at a given time, where each pump/blower is operated to purge pipe work whilst operating the filtration pump. This setting can be adjusted via the Setup Menu & allows the user to…
